GMC Acadia Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,937 Posts
Title says it (mostly ) all. Have a ACDelco replacement cap (see pic) and the retainer T piece at the end of the tether is very rigid. I'm wondering if anyone has any advice before I dig into this thing to ensure I don't break the T part while installing the thing.. Thanks.
View attachment 12042
Agree. .. do it on a hot day or heat the 'T" end of the tether up a bit maybe with a hair dryer or low power heat gun set on low heat.

It should just pop into the slot fairly easily then.
 
1 - 1 of 1 Posts
Top