GMC Acadia Forum banner
1 - 3 of 3 Posts

·
Registered
2011 GMC Acadia Denali 3.6 L.
Joined
·
10 Posts
Discussion Starter · #1 ·
Tried removing passenger fender. Was able to unscrew all bolts except the bottom two under the side skirt. Unable to access the two bottom bolts that can be removed only after removal of the outer side skirt panel because the panel is covering the two bottom bolts. The side skirt is installed via push stubs that are accessible only from inside the floor. Don’t know how to do it. Maybe will have to remove the door sills. Tried finding on YouTube but unsuccessful. Please help. Thanks.
 

·
Registered
Joined
·
2,937 Posts
Tried removing passenger fender. Was able to unscrew all bolts except the bottom two under the side skirt. Unable to access the two bottom bolts that can be removed only after removal of the outer side skirt panel because the panel is covering the two bottom bolts. The side skirt is installed via push stubs that are accessible only from inside the floor. Don’t know how to do it. Maybe will have to remove the door sills. Tried finding on YouTube but unsuccessful. Please help. Thanks.
It's typical to have to remove things like this in a reverse sequence of what was done during assembly. That often is a trick to find however.
 

·
Super Moderator
Joined
·
23,548 Posts
... Maybe will have to remove the door sills. Tried finding on YouTube but unsuccessful. ...
A thread about R&R of sill plates exists somewhere on the forum. Do a search and you should find it easily.
 
1 - 3 of 3 Posts
Top