GMC Acadia Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
2,717 Posts
Discussion Starter · #1 ·
I read the available threads, nothing is speaking to my issue so please chime in....

I can remove the right side screw (torx) on the light bulb cover, not the left, how do I get to the bulbs?

TIA

Laurie
 

·
Registered
Joined
·
420 Posts
Should be two screws on each lamp, once removed the whole bulb assembly should just pull down.
 

·
Registered
Joined
·
2,717 Posts
Discussion Starter · #3 ·
R-D said:
Should be two screws on each lamp, once removed the whole bulb assembly should just pull down.
Roger 2 screws... how do you get the left screws out?
 

·
Registered
Joined
·
420 Posts
Same as the other, righty-tighty lefty-loosie? :) Could be torqued in there pretty good ...
 

·
Registered
Joined
·
2,717 Posts
Discussion Starter · #5 ·
R-D said:
Same as the other, righty-tighty lefty-loosie? :) Could be torqued in there pretty good ...
They're not torqued, they're welded. Just odd the right side screws came out with no issues....
 

·
Registered
Joined
·
2,717 Posts
Discussion Starter · #6 ·
When all else fails, RTFM. Says to remove the 2 screws, duh...
They are welded, maybe some WD40 overnight?
 
  • Like
Reactions: ahabofthepequod

·
Registered
Joined
·
2,717 Posts
Discussion Starter · #8 ·
MedicRxDoc said:
When I did my plate bulbs, they aren't screws but they do look like it. I pulled them down with a plier and they held the clear cover in fine.
Hang on honey... the right screws are definitely screws. Could the left side be dummies?
 

·
Registered
Joined
·
420 Posts
Shouldn't be unless previous owner broke them somehow and replaced with something else. Otheriwse, 4 screws total.
 

·
Registered
Joined
·
420 Posts
 

·
Registered
Joined
·
2,717 Posts
Discussion Starter · #13 ·
1 - 14 of 14 Posts
Top