GMC Acadia Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 2007 acadia and I keep having intermittent problems with the injectors on cylinders 2(p0202) 4(p0204) and 6(p0206) with the p0300 random misfire code it will go a while with no issues but will run horribly for days then go back to running just fine I've checked for short circuits in the harness and found none and the injectors are working just fine. the voltage will drop and the traction control will shut off 30 seconds to a minute before it starts acting up I've taken it to two shops and they had no ideas on what it was. has anyone had this issue before or any ideas on what might be? Any help will be greatly appreciated
 

· Registered
Joined
·
23,754 Posts
Have you checked for an open circuit in the 'even' injector wiring when this occurs? Problem could be an intermittent break in the connection between the fuse box and ECM/PCM.
 

· Registered
Joined
·
1 Posts
I have a 2007 acadia and I keep having intermittent problems with the injectors on cylinders 2(p0202) 4(p0204) and 6(p0206) with the p0300 random misfire code it will go a while with no issues but will run horribly for days then go back to running just fine I've checked for short circuits in the harness and found none and the injectors are working just fine. the voltage will drop and the traction control will shut off 30 seconds to a minute before it starts acting up I've taken it to two shops and they had no ideas on what it was. has anyone had this issue before or any ideas on what might be? Any help will be greatly appreciated

Hey dc I'm having the same problem with my 08 Acadia. Did you ever find the problem?
 

· Registered
Joined
·
1 Posts
Hello I have a 2008 Gmc Acadia with the 202,204,206 codes with 0300 code as well it was running rough, now no start but cranks. I need help bad plugs are good, injector pulse good, coil packs good, any help would be greatly appreciated.
 

· Registered
Joined
·
1 Posts
I have a 2007 acadia and I keep having intermittent problems with the injectors on cylinders 2(p0202) 4(p0204) and 6(p0206) with the p0300 random misfire code it will go a while with no issues but will run horribly for days then go back to running just fine I've checked for short circuits in the harness and found none and the injectors are working just fine. the voltage will drop and the traction control will shut off 30 seconds to a minute before it starts acting up I've taken it to two shops and they had no ideas on what it was. has anyone had this issue before or any ideas on what might be? Any help will be greatly appreciated
Did you find the fix with this? It seems many of us are having the same issue.
 
1 - 9 of 9 Posts
Top