GMC Acadia Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Ohio will be eliminating the front license plate effective July 1, 2020. I am contemplating removing the front license plate holder. Does anyone have a picture of this vehicle without the license plate holder. I don't want to remove it if it doesn't look good.
 

·
Registered
Joined
·
21 Posts
Also from Ohio and I removed my front plate. Have a 17 Denali so it is not the same as the Limited but thought I'd share. It was quite easy to drill off the 2 aluminum pop rivet heads w/a 3/16" drill bit that held the plate holder. Then was able to push the rivet body through the hole. I had a couple of plastic trim fasteners in my parts bin and brushed some touch up paint on them. They pushed right in the existing holes and the paint matched well. fwiw. The trim fastener I used was similar to #16 in the attached pix. Don
AcadiaNoPlate.jpg PlasticTrimFastener.jpg
 
1 - 2 of 2 Posts
Top